UNI-T UPO2102, Руководство пользователя

Страница: 24 / 137

User’s Manual MSO/UPO2000 Seri es
24 / 137

Instruments.uni-trend.com
(a) (b)
Figure 4-11 Drawing Rectangle Gesture
Select “Area A”:

Drawing the area of trigger area A;

Open trigger area A;

Open “trigger area” menu.
Select “Area B”:

Drawing the area of trigger area B;

Open trigger area B;

Open “trigger area” menu.
Hints: Press “drawing rectangle” icon to switch drawing rectangle and operating waveform mode. Press
“drawing rectangle” icon, if icon displays , which represents the drawing rectangle mode is opened;
press “drawing rectangle” icon, if icon displays , which represents the operating waveform mode is
opened. Operating waveform mode of the oscilloscope is enabled by default.
(5) Touch shortcut operating
Separate two fingers and meanwhile slide two fingers to one direction, this gesture can quickly turn
on/off time measurement and voltage measurement cursor.
a. Time measurement cursor

Slide down in vertical to directly turn on time measurement cursor as shown in Figure 4-12 (a);

Slide up in vertical to directly turn off time measurement cursor;
b. Voltage measurement cursor

Slide right in horizontal to directly turn on voltage measurement cursor as shown in Figure 4-12 (b);

Slide left in horizontal to directly turn off voltage measurement cursor;
(a) (b)
Figure 4-12
Note : Turn on/off cursor requires that slide distance should be
＞
3div.