User’s Manual MSO/UPO2000 Seri es
56 / 137
Instruments.uni-trend.com
(2)
Indicating bit
Set the indicating bit of FlexRay protocol trigger, which can be (01XX), net load (11XX), empty (00XX),
synchronization (XX10), start (XX11).
(3)
ID
It is valid when the trigger condition is “identifier” or “ID and data”. ID value can set to 000
～
7FF.
(4)
Cycle number
It is valid when the trigger condition is “cycle number” or “header field”. Cycle number can set to 00
～
3F.
(5)
Net load length
It is valid when the trigger condition is “header field”. Net load length can set to 00
～
7F.
(6)
Header CRC
It is valid when the trigger condition is “header field”. Header CRC can set to 000
～
7FF.
(7)
Data
a.
Byte length
：
Set the data byte length which need to be trigger. Different byte length “data” has
different range. Byte length can set to 1
～
16.
b.
Data: Set the user-defined data which need to be trigger. The range can set to 00
～
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF.
c.
Biased data
：
Set biased data of byte data for trigger, which can set ON or OFF. ON: display “biased
data” menu, the biased range is 0
～
253;
OFF: “biased data” menu will be hidden.
(8)
Frame Type
It is valid when the trigger condition is “end of frame”. The frame can be static, dynamic or all frame.
a.
Static frame: It will generated in static frame.
b.
Dynamic frame(DTS)
：
It will generated in dynamic frame.
c.
All frame
：
It will generated in static frame and dynamic frame.
(9)
Error Type
It is valid when the trigger condition is “error”. The error type includes header CRC error, end of frame
CRC error, empty frame static error, empty frame dynamic error, synchronizing frame error and start
frame error.
a.
Header CRC
：
bus header CRC error.
b.
End of frame CRC
：
bus end of frame CRC error.
c.
Empty frame static error
：
bus empty frame static error.
d.
Empty frame dynamic error
：
bus empty dynamic error.
e.
Synchronizing frame error
：
FlexRay frame has a dedicated indicating bit in the frame header. When
this indicating bit is valid, the data frame is a synchronous frame.
f.
Start frame
：
FlexRay frame has a dedicated indicating bit in the frame header. When this indicating
bit is valid, the data frame is a start frame.
(10)
Decoding Setting
Quickly enter the entrance of FlexRay protocol decoding, refer to reference protocol decoding
