User’s Manual MSO/UPO2000 Seri es
20 / 137
Instruments.uni-trend.com
4.6 User Interface
Figure 4-6
a b c
Figure 4-7
User interface as shown in Figure 4-6 and the detailed description see the following.
1.
Trigger status identification: TRIGED (has been triggered), AUTO, READY, STOP, and ROLL.
2.
Time base scale: Indicates the amount of time represented by one grid, which can be adjusted by SCALE
knob on the horizontal control area. Tap time base scale to pop out horizontal interface as show in Figure
4-7(a), time base scale can change by using numeric keypad,
,
and SCALE knob .
3.
Sampling rate/storage depth: Display sampling rate and storage depth of the current scale.
4.
Waveform indicator
5.
Waveform trigger position: Display the trigger position of the current waveform.
6.
Horizontal displacement: Display the horizontal displacement value of waveform. Change this
parameter by using POSITION knob on horizontal control area. Press POSITION knob on horizontal
control area to make horizontal displacement value turn to 0. Tap time base scale to pop out horizontal
interface as show in Figure 4-7(a), horizontal displacement value can change by using numeric keypad,
,
and POSITION knob.
7.
Trigger status
：
Display the current trigger source, type, ramp, coupling and level status.
a.
Trigger source: There are CH1
～
CH4, main electricity, EXT, EXT/5 and D0-D15 status. CH1
～
CH4 will
display different trigger state colors based on channel colors.
13
8
10
11
9
7
6
1
2
3
12
4
5
