User’s Manual MSO/UPO2000 Seri es
10 / 137
Instruments.uni-trend.com
Build in 50MHz double channel function/arbitrary waveform generator (only for MSO-S), it supports real-
time loading data on the screen of the oscilloscope into AWG arbitrary waveform output
Bode Plots loop test analysis function
Up to 120,000 frames of hardware real-time waveform continuous recording and analysis function and
support USB storage device export.
Waveform operation: add, subtract, multiply, divide, digital filter, logical operation and advanced
operation
4M point enhance FFT, support frequency setting, waterfall curve, detection setting and mark
measurement
Automatic measurement of 36 waveform parameters
Multi-Scopes 2.0 supports multiple channels independent trigger fluorescent display
Multiple channels with independent hardware 7 digits frequency meter
DVM supports multiple channels independent AC/DC TRMS (true virtual value) measurement
Abundant trigger functions: edge, pulse width, video, ramp, runt pulse, over-amplitude pulse, delay,
timeout, duration, setup hold, Nth edge and pattern trigger
Region trigger function for capturing occasional signal and observing complex signal
Protocol trigger and decoding trigger with standard RS232, I
2
C, SPI and optional CAN, CAN-FD, LIN,
FlexRay
Ultra Phosphor display effect with 256 level gray scale display
8 inch high-definition capacitive touch
（
800×480
）
screen, support gesture operating click, slide, zoom,
edit and drag
Multiple peripheral interface: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG
output and VGA
Supporting SCPI programmable standard command
Support WEB access and control
