－1－
１．
For Safe Operation
1.1 Hazards peculiar to the pump and safety measures
Before operating or inspecting the pump, read this section carefully to fully
understand potential hazards and prevention methods.
The pump is not to be used with toxic of flammable gases.
1.1.1
Danger Leakage of hazardous gases and substances
Cause
Prevention method and measures
I
njury due to touching toxic
pump oil in the pump or harmful
substances attached to the
pump during inspection or
disposal
⇒
①
Before overhauling and disposing of the
pump, ask a waste disposal specialist to
make it safe.
②
Ask an authorized waste disposal
specialist to carry out disposal.
Danger
This pump is for dry air or the dry nitrogen suck only.
MBS-053-01 has surface treatment to MBS-053 and it is increasing resistance
to corrosive gases.
・
Periodic check of sealing material and exchange of it.
・
Before starting operation, leak check shall be performed.
・
When pump is in the abnormal condition, pull off the power plug.
・
A risk assessment has to be performed for the location of use.
・
When replace the pump, suction gas shall be purged.
・
Don’t use for other suction gas without over whole the pump.
・
Cleaning after suction gas is purged.
・
Prior to use with
corrosive
gases, install a system removing the toxicity.
Or dilute it in nitrogen or air to become the concentration which you can
discharge outdoors, and exhaust it.
