ULTRASOURCE ULTRAVAC 2100, Руководство пользователя

Страница: 26 / 123

THE NEW STANDARD FOR INNOVATION • info@UltraSourceUSA.com • UltraSourceUSA.com
UltraSource LLC • 1414 West 29th Street • Kansas City, MO 64108-3604 USA • 800.777.5624 • 816.753.2150
3.12
OPERA
TION
Perforating Knife Option
Perforating knives are used to facilitate the removal of excess pouch material. Perforating
knives are not intended to cut pouches off completely, only to perforate so that excess
material can be easily removed by hand.
Precut Option
The precut option is a patented system designed by UltraSource to increase the versatility
of the Ultravac
®
2100. This option increases the speed in which this machine can be loaded
with product. The user simply places the pouch full of product into the machine and pulls
it close to the seal bar allowing the excess material to hang on the outside of the machine.
Not only does this increase the loading speed, but it also improves the appearance of the
final product. The precut option also allows the end user to stock fewer sizes of pouches
because excess pouch material is trimmed away.
When using this option, the bag or pouch containing product is placed inside the machine
as usual. However, rather than having to carefully tuck the bag inside the slot in the
machine before closing the lid, the open end of the bag is placed outside the machine by
simply draping the bag over the side of the machine. When the lid is closed, the seal bar is
brought down and the special precut blade cuts evacuation slits in the bag or pouch, which
allow the air inside the bag to escape during the normal evacuation process.
Start by making sure the Precut menu is set to the “ON” position. With precut, air-assisted
sealing is required. Place the bag containing product inside the chamber. Drape the open
end of the bag over the side of the machine and close the lid. When the evacuation process
is finished, the bag will have “slits” pierced in it by the precut knife. The slits allow the air to
be evacuated from the bag. The slits also facilitate the removal of excess bag material after
the completion of the cycle.