Ultrasonix SonixTouch Q+, Руководство по обслуживанию

Страница: 32 / 148

Chapter 3: System Installation 00.053.204, Revision A SonixTouch Q+ Service Manual
3-18
To Configure the UPS:
1.
Using the openings provided to access the UPS breakers, turn 1: Battery Breaker to the ON position.
2. Turn 2: AC Input Breaker to the ON position.
3.
Turn 2: AC Input Breaker to the OFF position.
4.
Turn 2: AC Input Breaker to the ON position.
5.
Connect the power cord to a wall outlet.
6. Press and hold the console POWER button for one second to turn on the system.
7.
Power off and unplug the system.
Caution: It is important to turn on the breakers in the order specified.
Note: Although they are marked " EMERGENCY SHUTDOWN ONLY ", these openings are also intended to
give breaker access to qualified Ultrasonix Service personnel.
Note: At this point, depending on the length of time the system remains plugged in and powered on, the fan
may automatically shut down. If this occurs, it does not pose a problem.
System Front
1
1 2
2