PROGRAMMING MULTICALLS
4-9
4.3.3.1
P - PreShot
To program the MultiCall to perform a PreShot, perform the following
steps.
NOTE
If the cursor does not automatically move to
the next field after entering data in a field,
press the gray right arrow key to move to the
next field.
1.
Enter
P
in the
FUN field
.
2.
Enter the desired
PreShot Number (00-99)
in the
NUM field.
3.
Enter the
Camera Number (1-128)
where the PreShot is stored in
the
CAM field
.
4.
Enter a
transit time (0.0-9.9 seconds) in the MISC field
.
The transit time is the amount of time you want the camera to take
to move from its present location to the PreShot position. The
CCU-100 sends the transit time out to the SmartScan unit.
5.
Enter a
dwell time (00-99 seconds)
in the DWELL field.
Dwell time is the amount of time you want the CCU to wait before it
performs the next step in the MultiCall. A “00” dwell time tells the
CCU to perform the functions at the same time. A “15” second
dwell time means that the CCU will wait 15 seconds before
performing the next step in the MultiCall.
Note: The transit time
for a PreShot and the dwell time start at the same time.
6.
Enter another
function
or press
Enter
to end programming. If you
pressed Enter, Press
S
to save programming or press
Esc
to end
programming without saving.
Содержание CCU-100HD
