manualshive.com logo in svg

Ultrak CCU-100HD, Руководство пользователя

Поделиться
Скачать
Ultrak CCU-100HD Скачать руководство пользователя страница 94

SETTING DATE AND TIME

4-26

4.3.12

Setting the Date and Time in the CCU-100/HD Central Control Unit

To set the date and time on the clock in the CCU, perform the following
steps.

1. Press 

Shift F10

.

2. Press

 S

 on the KBD-100A keyboard.

3. Enter the 

date and time.

Month = 1-12

Day = 1-31

Year = last two digits of year

Hour = 1-24

Minute = 0-59

Second = 0-59

The system only accepts correct dates (including leap year) and times.

If an incorrect date and/or time is entered, the cursor moves to the

incorrect block for correct data to be re-entered.

4. Press

 Enter

.

Note:  The time is set at the instant the user presses ENTER.

If the Ultrak HD switcher is programmed to display the date and time,

the new setting appears on the monitor when the CCU sends the update

to the switcher.  The CCU sends the date and time to the switcher every

minute.

Содержание CCU-100HD



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды