Ultrak CCU-100HD, Руководство пользователя

Страница: 81 / 154

PROGRAMMING MULTICALLS
4-13
1. Enter C in the FUN field.
2. Enter the monitor number (1-32) in the NUM field.
3. Enter the camera number (1-128) in the CAM field.
4. Enter a dwell time (00-99 seconds) in the DWELL field.
Dwell time is the amount of time you want the CCU to wait before it
performs the next step in the MultiCall. A "00" dwell time tells the
CCU to perform the functions at the same time. A "15" second
dwell time means that the CCU will wait 15 seconds before
performing the next step in the MultiCall.
5. Enter another function or press Enter to end programming. If you
pressed Enter, press S to save programming or press Esc to end
programming without saving.
CALL A CAMERA TO AN ALARM MONITOR (AM) OR ALARM VCR (AR)
NOTE
These functions must be the first entries in the
MultiCall. All dwell times before the last AM or
AR must be zero.
If the MultiCall is to be assigned to an alarm, the video from the camera
in alarm can be called to an alarm monitor (AM) and/or an alarm VCR
(AR). See paragraph 4.5 for setting up alarm monitors and alarm VCRs.
To call the camera up to both an alarm monitor and an alarm VCR, you
must enter them as the first two steps in the MultiCall.