Ultrak CCU-100HD, Руководство пользователя

Страница: 63 / 154

3-13
Acknowledging Alarms
Alarms can be automatically acknowledged in the MultiCall or manually
acknowledged on the JPD-100 Controllers. Alarms can be acknowledged
even if the alarm contact has not returned to normal. After an alarm is
acknowledged, the contact closure has to return to its normal state and go
back into an alarm state before the CCU responds to it again. An alarm can
automatically be acknowledged while it is in the queue waiting for an alarm
monitor or alarm VCR. In this case, it does not appear on an alarm monitor
or VCR.
3.2.6 SHB-100 ShotBox Interface
Up to 16 SHB-100 ShotBox units can be daisy-chained together and
connected to the CCU. Each SHB-100 ShotBox has 16 programmable
function keys. Each function key is designed to perform one or more
SmartScan system actions using a single key stroke. The system actions
include PreShots, VectorScans, Video Switching, Auxiliary Control, and
starting MultiCalls (including itself). These actions can be performed
simultaneously or one step at a time with programmable dwell times between
each step.
To program the function keys, the user must program a MultiCall to perform
the desired system actions and store it in the Central Control Unit. The
MultiCall is then assigned to the function key on the SHB-100. When the
operator presses the function key on the SHB-100, the CCU sends out the
actions stored in the MultiCall to the SmartScan system. If the MultiCall has
not completed and the operator presses the function key again, the CCU
stops processing the MultiCall. If the MultiCall has completed and the
operator presses the function key again, the CCU restarts the MultiCall.