ULTRAFRYER Systems PAR-3-HE, Руководство по эксплуатации

Страница: 39 / 65

30A135
DISPLAY DESCRIPTION
300
- Time in Minutes and seconds.
360F
- Temperature in degrees Fahrenheit
182C
- Temperature in degrees Celsius.
C.Y. P.
- Purge Melt Cycle.
------
- Shortening Temperature is below 100ºF (38ºC) or above 392ºF
(200ºC).
HEAt
- The Controller is in Heating Mode.
.
- Heating mechanism is ON .
droP
- The fryer is ready for cooking.
ProB
- The Temperature Probe is OPEN.
HI
- The Temperature Probe is SHORTED or shortening temperature
is above the setpoint temperature.
L.
- Shortening temperature is BELOW setpoint temperature.
ULOC
- Unlock Password Option.
LOC
- Lock Password Option.
E. ULTRASTAT 11 COOKING COMPUTER
1. COMPUTER PANEL KEY DESCRIPTIONS
CONTROL
KEY
NO. DESCRIPTION
ON/OFF
1
2 To turn the Ultrastat 11 Computer ON depress the ON/OFF key ONCE
To turn the Ultrastat 11 Computer OFF depress and hold the ON/OFF key
for
3 SECONDS.
1
%
1
2
In OPERATING mode, used to INTIATE or CANCEL a cook cycle on
the LEFT HAND timer.
In programming mode, used to increase cooking time or temperature.
2
&
1
2
In
OPERATING
mode, used to
INTIATE
or
CANCEL
a cook cycle on
the
RIGHT HAND
timer.
In programming mode, used to decrease cooking time or temperature.
TEMP
1
2
3 Used to display ACTUAL TEMPERATURE when depressed ONCE .
Used to display SETPOINT TEMPERATURE when depressed TWICE .
Used to display remaining TIME when depressed THREE TIMES.
EXIT MELT 1 Used to manually exit the MELT MODE
P
1
2
3
Used to ENTER or EXIT the PROGRAMMING mode.
In PROGRAMMING mode, used to cycle through program options
Press and hold 3 seconds to EXIT program mode
2. ULTRASTAT 11 COOKING DISPLAY DESCRIPTIONS
3. OPERATION -
Prior to operating the Model PAR-3-HE Gas Fryer,
ENSURE
the Filter Tub Assembly is properly installed and
DOCKED
to the fryer’s Bulkhead Socket and the Temperature Control Access Door is closed, the fryer vat is fi lled with
shortening to the middle of the
“E”
in the word
LEVEL
of the shortening level mark on the rear wall of the vat; then:
a. Turn the Toggle ON/OFF Power Switch to the
OFF
Position.
b. Turn the
MANUAL
gas valve to the
OFF
position and wait
FIVE
(5) minutes for any accumulated gas to disperse.
c.
ENSURE
the
MAIN
gas shut-off valve is in the
ON
posiition
and the vent hood
EXHAUST FAN
is
ON.
d
.
Turn the
MANUAL
gas valve to the
ON
position.
e
.
Perform the following steps, in the order listed in paragraph F on the next page.
����� �����
����
��������� ��
�������
������ ������
������
��� ������
��������� ����
NOTE: If the Temperature Probe OPENS or SHORTS the Cook Mode will be CANCELED , the heating element will be turned OFF , and
the computer key will be INHIBITED.
18” PAR-3-HE
FRYER
Page 35 of 61