Ultra Lift 1500, Руководство по эксплуатации

Страница: 5 / 29

4. With the Strap Bar positioned for your load (see Figure 2) tilt the load forward
and slide the Lift Plate under it as you would with any hand truck.
5. Strap the load to the Lift Frame in the following sequence:
•
Open the Strap Handle and Cam Lock as shown in Figure 3.
•
Wrap the strap around the load and feed it through behind the Cam Lock
as shown in Figure 3.
•
Leave a slight bit of slack in the strap and close the Cam Lock as shown in
Figure 4.
•
Avoid the risk of pinched fingers! With the palm of your hand, close the
Strap Handle to secure the load. Closing the Strap Handle will
dramatically increase strap tension and it is normal for the Strap Handle to
snap into position. If you have difficulty closing the Strap Handle, release
the Cam Lock to create more slack. Retighten the Cam Lock and close the
Strap Handle.
Figure 3. Thread the Strap
Strap Bar Load Strap Cam Lock Open
Strap Handle Opened Strap
Figure 4. Lock the Strap
Cam Lock Closed
Figure 5. Tighten the Strap
Strap Handle Closed
-3-