Chapter 2: Introduction
Specifications
Part No. 24001157
VersaMux-4000 Operation & Installation Guide
Page 2-7
Revision C
Specifications
This section lists the VersaMux-4000 specifications as follows:
•
lists the supported rates by interface.
•
lists the CDI minimum drive distances.
•
lists the electrical interface specifications.
•
lists the physical specifications.
•
lists the environmental specifications.
Supported Rates by
Interface
lists the VersaMux-4000 supported rates by interface.
Table 2-2
VersaMux-4000 Supported Rate by Interface
Interface
Supported Rates (in kbps)
Combo Fiber-Copper Module
Optical Fiber (CV Mode)
96, 112, 128, 144, 192, 224, 256, 288, 320, 384, 448, 512, 576, 640, 768,
960, 1024, 1152, 1344, 1536, 1544, 1920, 1952, 2048, 2304, 2560, 2816,
3072, 3088, 3200, 3584, 3904, 3968, 4096, 4608, 4800, 4824, 5120,
5632, 5856, 6144, 6312, 6656, 7168, 7680, 7808, 8064, 8192, 8448
Combo Fiber-Copper Module
Optical Fiber (FOM Mode)
96 to 16384 in n x 8 kbps increments (The 16384 rate applies when the
unit is in the “Port Relay Mode.” See
Table 5-5, “Aggregate Parameter and
Option Descriptions,” on page 5-17
for more information.)
Combo Fiber-Copper Module
Copper-CDI
(Unbalanced CDI - CV Mode)
96, 112, 128, 144, 192, 224, 256, 288, 320, 384, 448, 512, 576, 640, 768,
960, 1024, 1152, 1344, 1536, 1544, 1920, 1952, 2048, 2304, 2560, 2816,
3072, 3088, 3200, 3584, 3904, 3968, 4096, 4608
NRZ Module (Aggregate)
N x 8 kbps increments across the range (96 to 16384)*.
*The fully tested and verified aggregate rates are:
1856, 2048, 3776, 4096, 7808, 8192, 9824, 10240, 11840, 12228, 15616,
16384