Ultra electronics VersaMux-4000, Руководство по эксплуатации и установке

Страница: 23 / 180

Chapter 2: Introduction Specifications
Part No. 24001157 VersaMux-4000 Operation & Installation Guide Page 2-9
Revision C
Electrical
Table 2-4 lists the electrical specifications for the VersaMux-4000.
Physical
Table 2-5 lists the physical specifications for the VersaMux-4000. Note that these
dimensions do not include the space required for user connectors
Table 2-4
Electrical Interfaces Specifications
Characteristic Specification
NRZ Digital Interface EIA-530 physical, RS-422 (Balanced) using a female DB-25 connector.
Electrical (copper) CDI Interface SMA Connector
Input Voltage 110/220 VAC (90-132/180-264), 47 to 63 Hz, single phase.
External Clock Input Accepts the following:
Zero-Crossing clock signal (1.0 MHz, 5.0 MHz, or 10 MHz.) which
provides a sine wave at 1V RMS minimum, 2V RMS maximum.
TTL clock signal running at 1.0 MHz, 5.0 MHz, or 10 MHz.
RS-422 clock signal running at 1.0 MHz, 5.0 MHz, or 10 MHz.
Table 2-4
Table 2-5
VersaMux-4000 Physical Specifications
Characteristic Specification
Height 1.75 inches
Width 17.4 inches
Depth 17.0 inches (including UG-1837)
Weight 8 pounds fully configured
Table 2-5