ULB PROPRIETARY RIGHTS NOTICE
- This document contains the confidential and proprietary information of ULB. You may not possess,
use, copy or disclose this document or any information in it for any purpose without express written permission. Neither receipt from any source,
nor possession of this document, constitutes such permission. Possession, use, copying or disclosure by anyone without express written
permission of ULB is not authorized and may result in criminal and/or civil liability.
U:\ILB\5_Technical Manual\TLB-R1000-480-OS_NO ALL\TLB-R1000_480_MANUAL_Rev03.docx
Page
15
of
35
WARNING
While Load bank is running (with load applied condition) setting Load Dump Switch to ON (upward)
position will cut off all applied load. However, cooling fan will continue to run until pre-set cooling time
is over.
A recommended 5 minute cool down period of the blower motor circuit, with no load applied, should
adequately remove any residual heat from the Load Bank and system components.
WARNING
Click <Load Drop> button any time will cut of all applied load. However, cooling fan will continue to run
until pre-set cooling time is over.
