UE Systems Ultraprobe 3000, Инструкция по эксплуатации

Страница: 9 / 35

Version 1 9
Standard accessories
DHC-2HH
Headphone headset is for use with a hard hat. This heavy-duty headset is designed to block out
intense sounds often found in industrial environments so that the user may easily hear the sounds
received by the ULTRAPROBE. In fact, the headphones provide over 23 dB of noise attenuation.
WTG-1 warble tone generator
The WTG-1 Tone Generator is an ultrasonic transmitter designed to flood an area with ultrasound.
It is used for a special type of leak test. ‘When placed inside an empty container or on one side of a
test item, it will flood that area with an intense ultrasound that will not penetrate any solid but will
flow through any existing fault or void. By scanning with the Scanning Module, empty containers
such as pipes, tanks, windows, doors, bulkheads or hatches can be instantly checked for leakage.
This Tone Generator is a WARBLE TONE GENERATOR. This internationally patented transmitter
sweeps through a number of ultrasonic frequencies in a fraction of a second to produce a strong,
recognizable “Warble” signal. The warble tone prevents a standing wave condition, which can
produce false readings and provides for a consistency of testing in practically any material.
Rubber focusing probe
The Rubber Focusing Probe is a cone-shaped rubber shield. It is used to block out stray ultrasound
and to assist in focusing on the field of reception of the Scanning Module.
Stethoscope extension kit
This consists of three metal rods that will enable a user to reach up to 31 additional inches (78.7
cm) with the Stethoscope Probe .
Optional accessories
long range module LRM
This uniquely designed module doubles the detection distance of a standard scanning module and
provides a narrow (10º) sensing area making it ideally suited for locating ultrasonic emissions (such
as a leak or electrical emission) at a distance
RAS-MT
A magnetically mounted transducer and cable magnetically attaches to metal surfaces such as
valves, steam traps and bearings. The RAS-MT needs a RAM (Remote Access Module) to connect
to the Ultraprobe 3000. (See RAS-MT, page 17)
DHC 1991 ear piece
Ear piece eliminates the need for standard headphones.
SA-2000 speaker amplifier
The SA-2000 is a loud speaker and amplifier that is compatible with the Ultraprobe headphone
output jack. Exit and and a circular transmission patern of 360°.
UFMTG-1991
The UFMTG 1991 is a multi directional warble tone generator. It has a high power output with a
circular transmission pattern of 360º