UE Systems Ultraprobe 3000, Инструкция по эксплуатации

Страница: 13 / 35

Version 1 13
Adjust Shutdown Time
The shutdown time allows you to select the time it will take to turn the instrument off once the
trigger is released. You may select from 1, 5, 30, 60, and 300 seconds.
1.
Enter Setup Mode…be sure to continue to hold the Trigger in.
2. Spin to Menu 03 Adjust Shutdown Time
3.
“Click” (press) the Sensitivity Dial in to enter
4. The Spin to the desired turn off time
5. Click to exit
Menu 03 Menu 03
Adjust Shutdown Time Adjust Shutdown Time
1 sec.
Click Spin
Menu 03
Adjust Shutdown Time
Click
04 User Sense (Sensitivity) Defaults
With experience a user will know which sensitivity level to use as the highest level. This mode
allows the user to adjust the default starting sensitivity level for inspection routes.
To set the Sensitivity Default:
1. Enter Setup Mode be sure to continue to hold the Trigger in.
2. Spin to Menu 04 User Sense Defaults
3.
“Click” the Sensitivity Dial to Enter
4. Spin to the desired level (70 to 00, 70 is highest 00 is the lowest)
5.
“Click” to set