F4000 LCD Operator's Manual
Document No: LT0117
Operating Instructions - System Functions
Page 6-20
19 April 2002
Issue 2.38
6.12 GLOBAL
RESET
6.12.1 FUNCTION
To issue an FFCIF Type 2 Global Reset, to reset all un-isolated zones in alarm (if any) and
to signal RESET to the output logic.
6.12.2 OPERATING SEQUENCE
To issue a global reset from a base display, other than a Zone or Point Recall, press:
6.12.3 NOTES
(1)
This command can be accessed from any base display or data recall display except
for the Zone Recall displays.
Press the "CLEAR" key to exit from a Zone or Point Recall display to the base
display before entering the Global Reset command.
(2)
The Global Reset command will result in all unisolated zones in alarm being reset.
This may result in events being removed from the FFCIF Alarm List.
