TV One C2-4000 Series, Руководство пользователя

Страница: 51 / 108

C2-4000 Series RGB Scaler Operation Manual
50
To make this adjustment, press the Menu Select knob and observe the
flashing brackets. Rotate the Menu Select knob until you have the desired
amount of delay displayed and then press the knob once again. To make the
change permanent, press and hold the knob until you hear the “Beep”.
13.10 Output RGB Level
Press the Menu Select knob (which will start the brackets flashing) and then
adjust the Menu Select knob until you have the desired RGB signal level
displayed on the Scaler’s output. Press the knob again to store the new value
in temporary memory. Press and hold until you hear a “Beep” to permanently
store the new value.
13.11 Aspect Ratio
Earlier, you learned how to set aspect ratios for an input. This adjustment is
for the output. When you are parked on the LCD screen shown above, press
the menu select knob to change from 4:3 to 16:9 and vice versa. This
adjustment is a simple toggle meaning it will be in one status or the other. To
make your change permanent, press and hold the Menu Select knob until you
hear the “Beep”.
14.0 ADJUST LOCK/OVERLAY SUB MENU
The Third Sub Menu is called Adjust Lock/Overlay. The word “ Lock ” refers to
the action of locking the Scaler to one of the input sources. Locking the Scaler
in this manner allows you to perform Picture-In-Picture as well as Keys and
similar special effects. The word “
Overlay ” actually encompasses both
Overlay and Underlay features. The Lock feature is tied to the background
image and the Overlay/Underlay refers to the foreground image.
On occasion, the foreground image has to be positioned with respect to the
background image’s synchronizing pulses so that both appear to have the
same centering characteristics to the viewer. In other words, if the foreground
image’s synchronizing pulses are shifted a bit with respect to the background
image’s synchronizing pulses, you need a means to line things up so that the
pictures themselves are not offset with respect to one another.
Adjust Scaler Parameters
Output RGB Level [ 81]
Adjust Scaler Parameters
Aspect Ratio [ 4:3]