C2-4000 Series RGB Scaler Operation Manual
49
13.7
Image Flip
Occasionally, it’s necessary to cause the output image to be flipped Vertically,
Horizontally or both. This adjustment allows you to make that change to the
output’s appearance. While on the screen shown above, press the Menu
Select knob. The brackets will begin to flash and you can choose from “Off”,
“Horiz.”, “Vertical” or ”H & V”. Make your selection and press the Menu Select
knob to record your change in temporary memory. If you want to make the
change permanent, press and hold the Menu Select knob until you hear the
“Beep”.
13.8
De-Glitch
De-glitch is used to provide clean, seamless switching between video
sources. With the RGB Scaler, it is unusual for the inputs to be synchronized
with one another and the De-glitch function insures that the switches between
these inputs do not cause the picture to breakup at the point of the switch.
This feature is normally left on however, if you have a very unstable input,
such as a video tape machine in need of mechanical adjustment, you may
wish to turn the feature off since the Scaler will not allow a unstable image to
appear on the screen if De-glitch is left on.
From the screen shown above, press the Menu Select knob to make a
change. Since there are only two choices, “On” or “Off”, there are no flashing
brackets to deal with. Each time you press the knob, the function toggles to
the other state. Once there, pressing and holding the knob until you hear the
“Beep” makes the change permanent in the event of loss of power.
13.9
Switching Fade Time
For subjective reasons, it may be desirable to change the way the Scaler
handles a switch between its inputs. The Switching Fade Time parameter can
be adjusted to allow from 0 seconds (instant change) to 5 seconds of delay
between the time one image disappears and another one appears. (During
the absence of an image, the screen may be black).
The delay can be adjusted in 1/10th second increments with the default
setting being .5 seconds.
Adjust Scaler Parameters
Image flip [ Off]
Adjust Scaler Parameters
De-glitch [ Off]
Adjust Scaler Parameters
Switching Fade Time [ .5]
Содержание C2-4000 Series
