TV One C2-4000 Series, Руководство пользователя

Страница: 44 / 108

C2-4000 Series RGB Scaler Operation Manual
43
effect on the blue sky. The RGB Contrast LCD screen affords you the
opportunity to make such adjustments for each of your RGB Input Buttons.
The RGB Contrast Screen is selected by depressing the Menu Select knob
one time immediately after reaching the screen. This will cause the left-hand
set of brackets to flash, enabling the adjustment of the “R” or Red portion of
the image. Move the Menu Select knob Clockwise or Counter-clockwise until
the desired amount of Red enhancement or de-enhancement is reached.
Pressing the knob once places the new value in temporary memory. Rotate
the knob one ‘click’ to the right causing the middle set of brackets to start
flashing. Press the knob once and then adjust the “G” (Green) image
characteristics, pressing the knob once more to store that value. Finally,
adjust the Blue component of the signal by rotating the knob to the right,
pressing it once and again moving the knob Clockwise or Counter-clockwise
until the desired amount of “B” (Blue channel) adjustment is reached. Then
press the knob a final time.
When you’re done, remember to press and hold the knob until you hear the
‘beep’ if you wish to make the changes permanent.
12.7 De-Interlace (YUV)
An interlaced input consists of two fields separated in time. Both fields are
required in order to make up the full resolution input image, but since they are
sent one after the other, a moving image will have “motion artifacts” if the two
fields are simply combined together. The most common artifact is a blurring
at the point of maximum acceleration of movement within an image. The
Scaler provides some tools to minimize the effects of de-interlacing of an
image.
Program Source RGB1
De-int. [ AUTO]