turck RU600U Series, Инструкция по эксплуатации

Страница: 20 / 58

Connection
Connection – synchronization mode
20
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
Connection diagram of the master sensor in multiplex mode
Pin Pin assignment
Pin 1 +24 VDC
4 BK
1 BN 3 BU
2 WH
5 GY
Pin 2 Output 2 (analog output or switching output)
Pin 3 GND
Pin 4 Multiplex output, connected to pin 5 of the slaves
Pin 5 Not connected (n. c.)
Pin Pin assignment
Pin 1 +24 VDC
4 BK
1 BN 3 BU
2 WH
5 GY
Pin 2 Output 2 (analog output or switching output)
Pin 3 GND
Pin 4 Output 1 (switching output)
Pin 5 Multiplex input, connected to pin 4 of the master
sensor
6.3 Connection – synchronization mode
„ Sensors must be connected to the master sensor according to the following wiring
diagram:
4
2
5
Slave 1
4
2
5
Slave 2
4
2
5
Slave n
4
2
5 n.c.
Master
…
Out 1
Out 2
Out 1
Out 2
Out 1
Out 2
Out 2
Fig. 19: Wiring diagram – synchronization mode
The sensors do not have to be addressed. The master sensor controls all sensors in a fixed time
cycle with a trigger signal via pin 4:
RU40U… RU130U… RU300U… RU600U…
22 ms 17.4 ms 37.4 ms 75.4 ms