turck RU600U Series, Инструкция по эксплуатации

Страница: 18 / 58

Installing
18
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
5 Installing
NOTE
When using more than one ultrasonic sensor in an application:
Avoid the overlapping of sonic cones.
This can occur if two sensors are mounted less than 200 mm (RU40…), 450 mm
(RU130…), 1000 mm (RU300…) or 2000 mm (RU600…) apart.
„
If this distance is undershot, synchronize the sensors using IO-Link.
The sensors can be mounted in any direction. The maximum tightening torque for fastening
the sensors is 20 Nm.
„ Clean the mounting surface and its surroundings.
„ When using a mounting aid: Fasten the sensor in the mounting aid.
„
Install the sensor or mounting aid at the intended position.
„
Ensure that the rear plug connector is accessible.
„
Mount the sensor so that the blind zone is clear of any relevant objects (see wave
patterns or technical data).
0
-15
-10
-5
5
10
15
0 10 20 30 40 cm
20x20 mm
ø 27 mm
0
-30
-20
-10
10
20
30
0 20 40 60 80 120 140 100 cm
100x100 mm
20x20 mm
ø 27 mm
Fig. 12: RU40… wave pattern Fig. 13: RU130… wave pattern
0
-40
-60
-20
20
40
60
0 50 150 250 100 200 300 cm
100x100 mm
ø 27 mm
0
-120
-80
-40
40
80
120
0 100 300 500 200 400 600 cm
100x100 mm
ø 27 mm
Fig. 14: RU300… wave pattern Fig. 15: RU600… wave pattern