turck RU600U Series, Инструкция по эксплуатации

Страница: 35 / 58

V2.0 | 2021/06
35
9.2 Setting by manual bridging (shorting)
Selecting the output
„ Select switching output 1: Bridge pin 3 (BU) with pin 5 (GY) for 2…7 s.
„ Select output 2: Bridge pin 3 (BU) with pin 5 (GY) for 8…13 s.
Setting the switching point
Switching point
Out2 Out1
GND/T1 > 8 s 13 s
LED GN 2 × 1 Hz
GND/T1 > 2 s 7 s
LED GN 1 × 1 Hz
Measure and save
Fail
LED GN/YE
1.5 s × 5 Hz
OK
LED GN
1.5 s × 5 Hz
GND/T1 > 2 s 7 s
LED GN 1 × 1 Hz
Normal operation
U
B
/T2 > 2 s
LED YE
1 × 8Hz
Cancel
Fig. 30: Setting the switching point
„ Select the switching output.
„ Position the object for the switching point.
„ Store the switching point: Bridge pin 3 (BU) with pin 5 (GY) for 2…7 s.
a The individual switching point has been taught in successfully if the green LED flashes for
1.5 s at a frequency of 5 Hz.