turck RU600U Series, Инструкция по эксплуатации

Страница: 24 / 58

Operation
Operation in IO-Link mode – LEDs
24
Hans Turck GmbH & Co. KG | T +49 208 4952-0 | F +49 208 4952-264 | more@turck.com | www.turck.com
8 Operation
NOTICE
Incorrect use of the sensor
Possible damage to property due to malfunction
„
Prevent the accumulation of material deposits on the surface of the sonic
transducer.
„ Keep the blind zone of the sensor clear. Refer to the technical data for the blind
zone S
min
of the sensor.
sensor
blind zone
sonic cone
object
S
min
a
coverage
teach-in-range
Fig. 20: Sonic cone and spread of the blind zone (schematic)
8.1 Operation as a diffuse mode sensor – LEDs
In diffuse mode the LEDs have the following indication functions:
LED Meaning
Yellow NO contact: Object within the teach-in range, switching output 1 on
NC contact: Object within the teach-in range, switching output 1 on
Green NO contact: Object within the detection range, switching output 1 off
NC contact: Object within the teach-in range, switching output 1 off
Off (only NO contact) No object within the detection range, switching output 1 off
8.2 Operation as a retroreflective sensor – LEDs
In retroreflective mode the LEDs have the following indication functions:
LED Meaning
Yellow Reflector present, switching output 1 on
Green Object between sensor and reflector, switching output 1 off
Off No object within the detection range, switching output 1 off
Switching output 2 inverts the signal of switching output 1.
8.3 Operation in IO-Link mode – LEDs
In IO-Link mode the LEDs have the following indication function:
LED indication Meaning
Green,
lit with short
interruptions IO-Link mode started