turck BL IDENT, Быстрый старт

Страница: 7 / 48

D101925 0412 - BLident® UHF
1-1
Intended purpose of this documentation
1 General information
1.1 Intended purpose of this documentation
This Quick Start guide contains the essential information required for the correct start-up of the
BL ident® UHF system with regard to data carriers, read/write heads and RFID electronic modules.
The two chapters give a brief overview of the BL ident® UHF system, the connection of the read/write
heads and provide the information required for start-up with the BLxx-2RFID-S, BLxx-2RFID-A and
BLcompact RFID electronic modules.
Further information on BL ident® is available online from http://www.turck.com .
1.2 Meaning of the symbols used
Danger
Risk of personal injury
Proceed with special caution.
This sign is placed next to a warning indicating a potential hazard. This refers to possible
personal injury or death which may occur if the warning instructions are not observed.
The user should interpret this symbol as follows: Exercise extreme caution.
Attention
Risk of damage to the device
Proceed with special care.
This sign is placed next to a warning indicating a potential hazard. This applies to possible
damage to systems (hardware and software) and installations.
Note
This symbol is placed next to general instructions that indicate important information on the
procedure for one or several operations.
The relevant instructions can facilitate work and possibly help to avoid additional work
resulting from faulty procedures.
1.3 Safety
Attention
This section should be read without fail since safety in the handling of electrical equipment
should not be left to chance.
This Quick Start guide was specially written for suitably qualified personnel with the relevant specialist
knowledge.