turck BL IDENT, Быстрый старт

Страница: 29 / 48

D101925 0412 - BLident® UHF
3-7
Start-up with the BLxx-2RFID-S and BLcompact RFID electronic modules
Of the wide range of setting options available in WebConfig the following are available for
TN....Q150L170-V1147 and TN...Q240L280-H1147 – the setting options for TN...-Q280 L640-H1147 are
different:

Event handling for LEDs/buzzer/RS485

(Gen2 selection and truncate) Selection of data carriers and masking to IS0 18000-6C

(Data matching) Analysis of the UII data carrier bank

(Access) Setting the access to data carriers, e.g. with multiple access

(Frequency setup/channel mask) Used transmission frequency/channel assignment

(Inventory profiles) Selection of parameters for multiple access to the data carriers

(Link profiles) Selection of parameters in the wireless transmission protocol
The basic default settings of the read/write heads are defined as follows:
Transmit frequency band
This parameter selects from four predefined frequencies.
(see Table 14: “ Parameters of the BLxx-2RFID-S RFID electronic modules” page 3-9 )
Position of the error code
Defines the position of the error code in the data image.
With word-based fieldbus systems choose the setting 1 = Byte 2-3 / 14-15.
Note
The WebConfig software application enables the read/write heads to be comprehensively
parameterized and configured via a PC. We recommend the STW-RS485-USB interface
converter (Ident no. 7030354) for the connection, together with the STW-RS485-USB-PS
power supply unit (Ident no. 7030355).
The software tool is only designed for users that wish to make more extensive settings to the
read/write heads that are different to the parameter options of
BL ident® .
Table 12:
Basic setting of
the read/write
heads
Parameter TN....Q150L170-
V1147 TN...Q240L280-
H1147 TN...-Q280 L640-
H1147
1
= Only USA
and Brazil
(EIRP)
Transmit frequency
band Band 1 (865.7 MHz
and 917.3 MHz) Band 1 (865.7 MHz
and 917.3 MHz) Band 1 (865.7 MHz
and 917.3 MHz)
ERP transmit power
level [dBm]
circular 26 29 33 (36
1
)
Note
The selection of transmit frequency band is only relevant for device versions with type
designations beginning with TN865-... or TN917-....