TSI Incorporated Q-TRAK Plus 8552, Руководство по эксплуатации и обслуживанию

Страница: 25 / 57

Operation 19
The following table summarizes the information displayed in the
Q-T
RAK
Plus Logging Protocols dialog box.
Item Description
Serial Number Displays the serial number of the Q-T
RAK
TM
Plus IAQ
Monitor.
Number Tests
Logged Displays the number of tests currently logged and stored
in the instrument.
Available
Memory % Displays the percent of available memory in the Q-T
RAK
Plus monitor (data logging only; single point memory is
not included).
Start Date Displays the start date for LOG 2 and LOG 3 modes.
Start Time Displays the start time for LOG 2 and LOG 3 modes.
Log Interval Displays the log interval for LOG 2 and LOG 3 modes.
Test Length Displays the test length for LOG 2 and LOG 3 modes.
Number of
Tests Displays the number of tests for LOG 2 and LOG 3
modes. Selecting more than one test will cause the
instrument to cycle through the logging test more than
once, separated by the “Time Between Tests.”
Time Between
Tests Displays the time between tests for LOG 2 and LOG 3
modes.
Percent
Memory
Required Displays the percent of logger memory required to
perform a LOG 2 or a LOG 3 mode sample. To store the
results of a LOG 2 or LOG 3 mode sample, the Available
Memory must be equal to or greater than the percent
memory required.