TSI Incorporated Q-TRAK Plus 8552, Руководство по эксплуатации и обслуживанию

Страница: 19 / 57

Operation 13
Figure 3-2: Survey Mode Screen (sample)
Ref Description
1 Primary Parameter (CO
2
concentration is shown).
2 Sample mode. Used for capturing single data points.
3 Remaining parameters.
4 Status message area.
5 Battery status.
Units
To change units displayed in the Survey mode use the
!
or
"
key to select
the parameter. Press either the
#
or
$
key and the units of the selected
parameter will change accordingly. The units displayed on the instrument
will be the same units that are stored during the log mode.
Sample Mode
The Sample mode is the default selection in the Survey Mode (the reverse
highlight indicates that it is selected). The Sample mode is used to capture a
single, 10-second averaged data point of all measured parameters.
1
2
4
3
805
2.0 PPM CO
75.1
°
F TEMP
35.1 % RH
70.1
°
F TEMP 2
PPM
CO2
SAMPLE
5