TS Industrie SAELEN GS/LYNX14P, Руководство по эксплуатации

Страница: 30 / 44

GS/ LYNX 14P
2014-12-09
30
-
Ex works, all 6 fastening screws of knives and inserts secured
without screwlock medium, with a torque of 157 Nm (16 M.kg ) , and
therefore must be loosened using a corresponding tool.
-
At the left and right side of the chimney base unscrew the two nuts
and open the expulsion chimney.
-
Turn the chimney backwards or place it on the ground.
KNIFE AND COUNTER-KNIFE REPLACEMENT
Remove ignition key before the maintenance works.
Maintenance
-
Unsrew all fastening screws from knives and inserts. Do always
use new screws of class 12.9 for installing knives and inserts.
-
Clean contact surfaces (1) and shoulders (2) .
-
Install new or sharpened knives of identical weight.
IMPORTANT: Only a specialist is allowed to sharpen the
knives on an appropriate machine and not on a portable
grinding machine.
Also it is to be observed that the edge of the knives is to be
sharpened at an angle of 35°.