TS Industrie SAELEN GS/LYNX14P, Руководство по эксплуатации

Страница: 23 / 44

GS/ LYNX 14P
2014-12-09
23
Watch out for solid foothold of the operating personnel
Place chipping material on the hopper bottom and move it with the thicker en (trunk) towards the infeed rollers
(chamfer the thick end of the trunk).
As soon as the material is captured by the rollers move to the side, because due to unevenness of the trunk
there might be material kick-out
The captured material now is automatically chipped and hurled into the direction (distance) into which the
expulsion chimney was set to beforehand
After the material infeed from time to time attention is also to be paid to the thrown out chippings, and maybe
readjust the direction of ejection. The ejection distance of the material is controlled with the ejection hatch
When chipping splints, barks and brush-wood splintering can be avoided by always feeding the material side-
by-side and lengthwise positioned into the infeed channel
If the feed stops (jamming because of too much material or forked branches), press the black button (rollers
rotate backwards) and the chipping material is pushed back. Now reduce the material quantity, cut the forked
branch, and restart the infeed
The hopper can only be cleaned using appropriate wooden aids
While the machine is running do not reach into the hopper! If required, push the kindling further using a
wooden slat or wood slider! Never push the chipping material into the hopper using a metal rod or metal
slider! It is also prohibited to stay in the danger area! In case of especially thick or hard wood, it makes sense
to slow down the engine, reduce the speed until it has reached the rated speed.
If the area of the expulsion chimney is jammed, the hood must not be opened before standstill of the rotor and
shut-down drive engine, and then the material can be removed with an appropriate tool.
The chipper produces a guaranteed sound power level according to Directive le 2000/14/EC :