TS Industrie SAELEN GS/LYNX14P, Руководство по эксплуатации

Страница: 18 / 44

GS/ LYNX 14P
2014-12-09
18
A. Frame
The frame is used for allocating the different components of the chipper LYNX and allows an independent
movement of the machine.
Rotor:
The rotor is the main component of the machine and has the task
to chip the material coming from the infeed roller.
The rotor rotates at a constant speed.
B. Chipping unit
The unit consists of one infeed hopper (1) , one
infeed roller (4) and one rotor.
Infeed roller:
The roller transport the chipping material at con-
stant speed in direction rotor. An anti-blocking
system disconnects the infeed if the speed of
the rotor falls below the minimum speed
(chipping unit jammed) and automatically con-
nects again after the speed of the rotor is suffi-
cient for correct chipping work.
Using the gear shift linkage at the infeed hop-
per, the infeed can turn into both directions
(forward and backward).
With the
setting screw on the distributor below
the infeed hopper, the turning speed can be ad-
justed to the diameter of the wood chips.
Setting screw completely screwed in: Feed
roller at maximum speed.
General description and functions