TS Industrie SAELEN GS/LYNX14P, Руководство по эксплуатации

Страница: 11 / 44

GS/ LYNX 14P
2014-12-09
11
13. For transporting the wood chipper it must be moved into transport position.
A) Fold the hopper (as far as present) up and check if the locking device is engaged.
B) Move the wood chipper into transport position an check if the safety pin has engaged.
C) Turn the ejection channel such that it does not jut laterally out over the machine.
D) If necessary lift all parking sustainers.
14. When driving on public roads the lighting must correspond to the Highway Code.
15. For work, the wood chipper must be parked stable.
16.
a) Single-axle machines with engine are attached to tractor vehicles, and the parking brake is
applied as far as present.
In case of machines without brakes it is required to push the supplied chocks under the
wheels.
b) For operation without tractor vehicle it is required to lower the parking sustainers (front
and rear).
17. For safety reasons a minimum distance of 10 metres should be kept from the machine.
The expulsion must always be directed away from the operating personnel .
18. Only after the engine is shut off and the rotor is standing still, it is allowed to reach with
the hands into the infeed mouth.
19. The admissible hydraulic operating pressure set ex works is not allowed to be changed.
20. Only trunks up to a diameter of 16 cm are allowed to be processed.
21. The hydraulic system is to be competently checked every year. The hydraulic hoses are to
be replaced after 5 years.
22. During feed of the wood chipper do not reach into the feed hopper. Congestions are to be
removed in a safe manner (shut the engine down, use an aid). For pushing in short pieces or
shrubbery material do only use solid wooden rods or other aids made of wood. Our wood
chippers are designed only for manual feed. Do not use mechanical resources (gripper) for
feeding the machine.
Do not move in the area of the expulsion.