TS Industrie SAELEN GS/LYNX14P, Руководство по эксплуатации

Страница: 22 / 44

GS/ LYNX 14P
2014-12-09
22
Operation
START-UP
Each time before start-up of the machine ensure that is is standing stable on
solid ground.
1. Check if the hatch of the expulsion channel is open.
2. Position the starter lever fully to the left.
3. Put the gas lever to the left to part throttle.
4. Turn the contact key to the right and start the engine.
5. Open the choke and have the engine run at idle speed until reaching
operating temperature.
6. Push the gear lever slowly down to connect the rotor.
7. Set the engine to max. speed.
8. Unlock the bolt upwards and pull the control rod backward to engage the
feed roller.
9. Now work can be started.
ATTENTION!
In case the machine shows difficulties in chipping the material and has to be switched
off, restart the engine only after having removed the cause and the material was
removed from the rotor!!!