ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
19
You can set the TRP-C38 by Console mode.
7-3.Using Telnet
Telnet can be used to configure the TRP-C38 Serial Server from any PC on the LAN. The Telnet
window displays the same configuration information shown in Console Mode and allows server
properties to be configured. See chapter 6 for details on Server Properties.
Ensure the PC and TRP-C38 are connected to the LAN, and the serial server is in RS-232,
RS-422 or RS-485 mode before you can telnet to it and access the configuration screens. From
the
Desktop
, click
Start
, and then
run.
The Run dialogue box will open. Type in Telnet
and the IP
address of the Serial Server
which
to be configured, click
OK
.
STEP1.
Select Start then Click “RUN” then key in the “Telnet IP”
