ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
17
the currently selected port. The “
vcomui”
dialogue box will appear indicating you must restart
the device before the new settings will take effect. Click Yes.
7-2 Using Console Mode
The console mode allows access to the TRP-C38 setup menu. This is one way to reconfigure the
default settings for the application. A serial connection is made between a COM port on the PC
and the TRP-C38 serial port A with a null modem cable. In console mode, the serial port defaults
to an RS-232 interface.
The TRP-C38 serial port default settings are, baud rate 9600, 8 data bits, no parity, and 1 stop bit.
Hyper Terminal should be used for this type of setup. Hyper Terminal’s serial settings are
configured the same as the mentioned default settings of the TRP-C38 and must be set to
VT100 emulation mode. The default settings are used only if they have not been changed
7-2-1 Console Mode Hardware Wiring
7-2-2 Console Mode Software Install
STEP1.
Select “Hyper Terminal” WINDOWS Utility
Start ---Accessories---Communications --- Hyper Terminal
