manualshive.com logo in svg

TROY Group PPS-8, Быстрая установка

Поделиться
Скачать
TROY Group PPS-8 Скачать руководство пользователя страница 59

 

_____________________________________________________________ 

IPP Configuration 

13-1

 

13 

 

IPP Configuration 

 

The Internet Printing Protocol (IPP) allows you to print over both local area 
networks and LANs.  IPP is currently included with the Windows 2000 
operating systems, and will be supported on other operating systems in the 
future.    It is supported on the XJet 3000, Pony 100, and XConnect 100. 
 

Windows 2000 IPP Configuration 

 
The following steps are required to use IPP with Windows 2000 and a 
TROY  print server: 
 
3.  Make sure that the print server is powered on and configured with a 

valid IP address (see chapter 4 for information on how to configure the 
IP address).  

Note that the printer cannot be configured unless the 

Windows 2000 server can communicate with the print server.

  Also, 

make sure that your print server has V3.75 or later firmware. 

4.  Go to the 

Start

 button, click on 

Printers

. 

5.  Double click on 

Add Printer

. 

6. Click 

on 

Next

. 

7. Select 

Network Printer

 and then click on 

Next

. 

8. Select 

Connect to a Printer

 on the Internet or on your Intranet.  Enter 

the URL of the print server along with the service name (BINARY_P1 
is the default service).  For example: 
 

 http://192.189.207.99/binary_P1 

 

9.  It may take a couple of minutes to find the print server.  You may also 

get a message that the correct driver is not installed; if so, click OK to 
install the driver and select the appropriate printer.   

10.  Select the printer type and click on 

Next.

 

11.  If desired, make the printer the default printer and click on 

Next

. 

12. Click on 

Finish

.  You are now ready to use the IPP printer. 

 
 

Содержание PPS-8































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды