_____________________________________________________________
12-2 JetSend
Configuration
can change the settings using the print server console. To do this, connect
to the IP address of the print server using TELNET, type in anything for the
user name, enter the password
ACCESS
, and then execute one or more of
the following commands (examples are shown in brackets; refer to chapter
3 of the
Administrator's Guide
on the CD-ROM for additional information
on how to use the console):
SET PORT <port name> COLOR ENA/DIS
[SET PORT P1 COLOR ENA]
SET PORT <port name> PCL 3/5
[SET PORT P1 PCL 5]
SET PORT <port name> RES 300/600/1200
[SET PORT P1 RES 1200]
Type
EXIT
to exit the console and save the settings. You are now ready to
use the NetSend.
