_____________________________________________________________
6-4
NetWare Network Configuration
3. The queue name will now appear in the
Available Print Queues
under
the selected volume (for bindery mode) or in the selected context (for
NDS mode).
•
Click on the desired queue.
•
Click on
Add>>
The name will now appear in the
Serviced Print Queues
window.
4. Click
Close
and then
OK
. You can now use the print queue from your
NetWare workstation. Refer to the appropriate
Configuring the
Workstation
section at the end of this chapter.
5. If you want to configure additional queues and ports, you must use the
Novell NWAdmin utility (this program is usually found in the Public
directory on the NetWare file server). The procedure is as follows:
•
Start the NWAdmin utility and make sure that you are in the
right context (if not, go to
Tools
on the menu bar, select
NDS
Browser
, and then browse for the desired context).
•
Select the container where you want the print queue to reside.
•
Go to
Tools
on the menu bar and select
Print Services Quick
Setup
.
•
Browse for the NetWare Print Server by clicking on the button
next to the
Print Server Name
window.
•
Enter the name of the NDS Printer for the desired port in the
Name
box (for example, _04ECBA_P2)
•
The Type box should be left at the default Parallel setting.
•
Select the desired banner type.
•
Enter any desired name for the print queue.
•
If necessary, browse for the volume.
•
Click
Create
to create the print queue. You are now ready to use
the queue from a NetWare workstation. Refer to the appropriate
Configuring the Workstation
section at the end of this chapter.
Note:
Refer to the
Administrator’s Guide
on the CD supplied with the print
server
for:
•
Instructions on all other Novell configurations, including NetWare 3.x,
`Novell Distributed Print Services (NDPS), and Remote Printer Mode.
•
Instructions on configuration using setup utilities such like HP
JetAdmin, PCONSOLE or NWAdmin,
