Troxler NTO 4730, Руководство по эксплуатации и инструкции

Страница: 84 / 158

5–30
Date Format
The oven can display the date in either
mm/dd/yyyy or dd/mm/yyyy
format, where mm = month, dd = day, and yyyy = year. To select the
desired date format, press
〈
4
〉
at the
Time/Date Menu
. The oven
displays:
Date Format
1. mm/dd/yyyy
2. dd/mm/yyyy
Use the numeric keys to select the desired format, and press
〈
ENTER
〉
. The oven sets the date format and returns to the
Time/Date Menu .
BAUD RATE
The oven includes a serial communications port and an auxiliary
port mounted side-by-side at the left side of the rear panel (as
viewed from the rear of the oven). The serial communications port
(the leftmost of the two ports) is used to connect the oven to an
RS-232 serial device, such as a printer or computer. The auxiliary
(right) port is intended for factory use only.
NOTE
To ensure proper data transfer, the cable connected to
the serial communications port should not exceed 3 m
(10 ft) in length.
To ensure proper communications over these ports, the baud rate, or
communication speed, of the oven must match that of the peripheral
device. The baud rate on each port can be set to 600, 1200, 2400,
4800, or 9600 baud. The default setting is 9600 baud.