manualshive.com logo in svg

Troxler NTO 4730, Руководство по эксплуатации и инструкции

Поделиться
Скачать
Troxler NTO 4730 Скачать руководство пользователя страница 27

 

Troxler NTO 

2–7 

2. PROD

UCT S

AFETY

 

♦

 

Connect the oven to a power source that provides proper voltage 
and current (see Appendix C). Ensure that the oven, power 
source, and ground code requirements are compatible. 

♦

 

The oven power source must have a reliable earth ground 
connection, or a hazardous condition may occur during oven 
operation. 

♦

 

Keep all cords away from the top and sides of the oven. 

♦

 

Burning asphalt releases carbon monoxide. Ensure that the oven 
is properly ventilated.  

♦

 

Locate the oven in a well-ventilated room with access to a fume 
hood or other suitable ventilation system. If the exhaust duct 
shipped with the oven is used, locate the oven 

no more

 

than

 

4.6 m (15 ft) from the exhaust outlet. Be sure to sufficiently 
insulate the exhaust duct. Follow local code for exhaust outlet. 

♦

 

Do not restrict the airflow in and around the bottom of the oven. 

♦

 

Do not place any objects, other than those specified in this 
manual, into the oven chamber. 

♦

 

Remove all extraneous material in or around the oven. 

♦

 

Keep the area around the oven clear and free from all 
combustible materials, gasoline, and other flammable vapors 
and liquids. Failure to do so could cause fire or explosion. 

♦

 

Do not place anything on top of the oven. 

♦

 

Never hit, puncture, or abuse the oven interior. 

♦

 

Do not override the door lock.  

♦

 

This oven should only be operated by personnel who are 
familiar with the proper operation of the device.  

♦

 

Do not use the oven for cooking, cleaning, or testing materials 
other than asphalt or aggregate as defined by this manual. 

♦

 

Do not attempt to dry any aggregates mixed with volatile 
chemicals. 

♦

 

Obtain and use appropriate safety equipment: heat-resistant 
gloves that can withstand 650 

°

C, and a face shield to protect 

the face. 

Содержание NTO 4730































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды