Instruments
69
The display will scroll through the
menus when pressing down on the
SCROLL button (it will scroll through in
the reverse order when pressing up on
the SCROLL button):
• t-SEt - Clock Adjustment
• Ind - Auto - Self-cancelling Direc-
tion Indicators
• SIA - Service Interval Announce-
ment
• UnitS - Changing Units (imperial,
metric or US).
• REtURn - Returns the instruments
to the main display.
• ttc - Triumph Traction Control (TTC)
settings
• AbS -
Antilock Braking System
(ABS) settings
Each menu item can be edited as
follows:
Traction Control (TTC) Disable
It is possible to temporarily disable the
TTC system. The TTC system cannot be
permanently disabled, it will be
automatically enabled when the ignition
is turned off and then on again.
Warning
Do not attempt to adjust the traction
control settings while the motorcycle is
in motion as this may lead to loss of
motorcycle control and an accident.
Warning
If the traction control is disabled, the
motorcycle will handle as normal but
without traction control. In this
situation accelerating too hard on wet/
slippery road surfaces may cause the
rear wheel to slip, and may result in
loss of motorcycle control and an
accident.
To Disable the TTC
To access the traction control settings:
• With the motorcycle stationary and
in neutral, turn the ignition to the
ON position.
• Press and release the SET button
on the left hand switch housing un-
til SEtUP is shown in the display
screen.
• Press and release the SCROLL but-
ton until ttc is shown.
• Press the SET button and On or
OFF will be displayed.
• Press and release the SCROLL but-
ton until OFF is shown in the dis-
play screen.
• Pressing the SET button will disable
the TTC system; OFF will be dis-
played for two seconds, and the
TTC disabled warning light will be il-
luminated.
• Press the HOME button and trip 1
will be shown in the display screen.
