Maintenance
140
Engine Oil
cbnz
Warning
Motorcycle operation with insufficient,
deteriorated, or contaminated engine
oil will cause accelerated engine wear
and may result in engine or
transmission seizure. Seizure of the
engine or transmission may lead to
sudden loss of control and an accident.
In order for the engine, transmission,
and clutch to function correctly,
maintain the engine oil at the correct
level, and change the oil and oil filter in
accordance with scheduled
maintenance requirements.
Oil Level Inspection
Warning
Never start the engine or run the
engine in a confined area.
Exhaust fumes are poisonous and can
cause loss of consciousness and death
within a short period of time.
Always operate your motorcycle in the
open-air or in an area with adequate
ventilation.
Caution
Running the engine with insufficient oil
will cause engine damage. If the low oil
pressure indicator remains on, stop the
engine immediately and investigate the
cause.
2
3
1
4
cgii
1. Filler
2.
Sight glass
3.
Oil level (correct level shown)
4.
Crankcase oil level lines
To inspect the oil level:
• Start the engine and run at idle for
approximately five minutes.
• Stop the engine, then wait for at
least three minutes for the oil to
settle.
• Note the oil level visible in the sight
glass.
• When correct, oil should be visible
in the sight glass at a point midway
between the upper (maximum) and
lower (minimum) horizontal lines
marked on the crankcase.
