General Information
101
To adjust the handlebars:
• Loosen and remove the handlebar
rear (8 mm threaded) clamp fixings,
and then the front (10 mm thread-
ed) clamp and riser fixings.
• Lift the handlebars out of the han-
dlebar risers and support with the
aid of an assistant.
• Rotate both risers through 180°
and align the fixing holes.
• Reposition the handlebars to the
risers.
• Refit the upper clamps, and secure
with the two 10 mm threaded fix-
ings in the rear fixing positions. Do
not fully tighten the fixings at this
stage.
• Rotate the handlebar so that the
alignment marking on the handle-
bar aligns with the split line on the
upper clamps/risers.
1
2
3
1.
Upper clamp
2.
Clamp split line
3. Alignment marking (Tiger 800 XRX
shown)
• Tighten the 10 mm fixings to
35 Nm.
• Refit the 8 mm fixings to the front
positions and tighten to
26 Nm.
Satellite Navigation Mounting
Bracket (if fitted)
The satellite navigation bracket features
a mounting plate that is compatible with
Garmin Nuvi® Satellite Navigation
Systems 660 and 220.
Other satellite navigation systems may
be compatible.
When installing a satellite navigation
system, refer to the manufacturer’s
instructions.
cisf
1
2
1.
Mounting plate
2.
Pivot bolt
To adjust the mounting plate:
• Loosen the pivot bolt.
• Set the mounting plate to the de-
sired position.
• Retighten the pivot bolt to
5 Nm.
The satellite navigation mounting
bracket is available as an accessory kit
from your authorised Triumph dealer.
