General Information
79
Ignition Switch Positions
This is a three position, key operated
switch. The key can be removed from
the switch only when it is in the OFF or
LOCK position.
To lock the motorcycle:
• Turn the handlebar fully to the left.
• Turn the key to the OFF position.
• Push and fully release the key.
• Rotate it to the LOCK position.
Warning
For reasons of security and safety,
always move the ignition switch to the
OFF position and remove the key when
leaving the motorcycle unattended.
Any unauthorised use of the
motorcycle may cause injury to the
rider, other road users and pedestrians
and may also cause damage to the
motorcycle.
Warning
With the key in the LOCK position the
steering will become locked.
Never turn the key to the LOCK
position while the motorcycle is moving
as this will cause the steering to lock.
Locked steering will cause loss of
motorcycle control and an accident.
Right Handlebar Switches
All Models except Tiger 800 XR
1
2
4
5
6
3
1.
HOME button
2.
Engine start/stop switch
3.
START position
4.
RUN position
5.
STOP position
6.
Hazard warning lights switch
The following sections describe the
handlebar buttons and switches
functions.
HOME Button
The HOME button is used to access the
main menu on the instrument display.
Press and release the HOME button to
select between the main menu and
instrument display.
Engine Stop Switch
In addition to the ignition switch being
turned to the ON position, the engine
stop switch must be in the RUN position
for the motorcycle to operate.
