Instruments
64
Coolant Temperature Gauge
1
1.
Coolant temperature gauge
The coolant temperature gauge
indicates the temperature of the engine
coolant.
When the ignition is switched on, all
eight bars of the display will be shown.
When the engine is started from cold
the display will show one bar. As the
temperature increases more bars in the
display will be shown. When the engine
is started from hot the display will show
the relevant number of bars, dependant
on engine temperature.
The normal temperature range is
between four and six bars. If the coolant
temperature becomes too high the
display will show eight bars and will
start to flash. The high coolant
temperature light in the tachometer will
also be illuminated.
Caution
Do not continue to run the engine if
either of the high temperature
warnings are displayed as severe
engine damage may result.
Fuel Gauge
1
1.
Fuel gauge
The fuel gauge indicates the amount of
fuel in the tank.
With the ignition switched on, the
number of bars shown in the display
indicates the level of fuel.
When the fuel tank is full all eight bars
are displayed and when empty, no bars
are displayed. Other gauge markings
indicate intermediate fuel levels
between full and empty.
When two bars are displayed the low
fuel warning light will illuminate, five
seconds later the display screen will
switch to the Range to Empty display
approximately 4.0 litres of fuel
remaining in the tank and you should
refuel at the earliest opportunity.
After refuelling, the fuel gauge and
range to empty information will be
updated only while riding the
motorcycle. Depending on the riding
style, updating could take up to five
minutes. If the display screen is
changed so that the Range to Empty is
no longer shown, this information may
be displayed again through the
Information Menu as described in
