Maintenance
142
Warning
The oil may be hot to the touch.
Avoid contact with the hot oil by
wearing suitable protective clothing,
gloves, eye protection, etc.
Contact with hot oil may cause the skin
to be scalded or burned.
• Unscrew and remove the oil filter
using Triumph service tool
T3880313. Dispose of the old oil fil-
ter in an environmentally friendly
way.
• Apply a thin smear of clean engine
oil to the sealing ring of the new oil
filter. Fit the oil filter and tighten to
10 Nm.
• After the oil has completely drained
out, fit a new sealing washer to the
drain plug. Fit and tighten the drain
plug to
25 Nm.
• Fill the engine with a 10W/40 or
10W/50 semi or fully synthetic mo-
torcycle engine oil that meets spec-
ification API SH (or higher)
and
JASO MA, such as Castrol Power 1
Racing 4T 10W-40 (fully synthetic).
• Start the engine and allow it to idle
for a minimum of 30 seconds.
Caution
Raising the engine speed above idle
before the oil reaches all parts of the
engine can cause engine damage or
seizure.
Only raise engine speed after running
the engine for 30 seconds to allow the
oil to circulate fully.
Caution
If the engine oil pressure is too low, the
low oil pressure warning light will
illuminate. If this light stays on when
the engine is running, stop the engine
immediately and investigate the cause.
Running the engine with low oil
pressure will cause engine damage.
• Make sure that the low oil pressure
warning light remains off and the
oil pressure message is not visible
in the instrument display screen.
• Stop the engine and recheck the oil
level. Adjust if necessary.
Disposal of Used Engine Oil and Oil
Filters
To protect the environment, do not pour
oil on the ground, down sewers or
drains, or into watercourses. Do not
place used oil filters in with general
waste. If in doubt, contact your local
authority.
Oil Specification and Grade
Triumph's high performance fuel
injected engines are designed to use
10W/40 or 10W/50 semi or fully
synthetic motorcycle engine oil that
meets specification API SH (or higher)
and JASO MA, such as Castrol Power 1
Racing 4T 10W-40 (fully synthetic)
engine oil, sold as Castrol Power RS
Racing 4T 10W-40 (fully synthetic) in
some countries.
