Triumph Adler CLP 4550, Инструкция по эксплуатации

Страница: 85 / 236

Using the Operation Panel 4-29
Quick Copy (Using Quick Copy)
This mode enables you to print the requested number of copies of a job,
simultaneously storing the job on the hard disk. When additional copies
are required, you can reprint the required number of copies from the
printer operation panel. To print a job as a quick copy job, refer to
Printer
Driver User Guide .
The default number of print jobs that can be stored on the hard disk is 32.
This value can be increased to up to 50. For details, refer to
Job Box
Settings (Job Box Configuration) on page 4-40 . When the number of jobs
reaches the limit, the oldest job will be overwritten by the new one.
When the printer is turned off, all stored jobs will be deleted.
Printing Additional Copies using Quick Copy
1
In the Job Box menu, press
U
or
V
to select Quick Copy .
2
Press [OK] . The
Quick Copy
screen appears listing the user names
for stored jobs.
3
Press
U
or
V
to select the user name you entered in the printer
driver.
4
Press [OK] . The printer displays a list of the jobs stored under the
selected user name.
5
Press U or V to scroll to the desired job title.
When
[Select]
( [Right Select] ) is pressed, the file is selected. A
checkmark will be placed on the right of the selected file.
Select the checkmarked file and press
[Select]
( [Right Select] )
again to cancel the selection.
Note
Refer to the Printer Driver User Guide for the driver
settings.
Quick Copy:
a b
l
User01
l User02
l User03
l User01: a b
All Files
Q
Data01
T
Data02
T
[ Select ]
Note
To select all files, follow the steps of Select/Deselect All
Files on page 4-30 .