manualshive.com logo in svg

Triumph Adler CLP 4550, Инструкция по эксплуатации


Поделиться
Скачать
background image

 

Glossary-1

Glossary

Additional memory

An additional memory (optional) is used for increasing the memory 
capacity of this machine. For DIMM that can be used in this machine, 
contact your service technician.

AppleTalk

AppleTalk offers file sharing and printer sharing and it also enables you to 
utilize application software that is on another computer on the same 
AppleTalk network.

Custom Box

The Custom Box function stores print data for each individual user on the 
printer and allows the user to print single or multiple copies of the stored 
data later using the printer's operation panel.

Default Gateway

This indicates the device, such as a computer or router, that serves as the 
entrance/exit (gateway) for accessing computers outside of the network 
that you are on. When no specific gateway is designated for a destination 
IP address, data is sent to the host that is designated as the Default 
Gateway.

DHCP (Dynamic Host Configuration Protocol)

This is a protocol that automatically resolves the IP address, Subnet 
Mask and Gateway address on a TCP/IP network. Use of DHCP 
minimizes the load of network administration, especially on network 
environments with a large number of client computers where it is not 
specifically necessary to assign a separate IP address to each client, 
including printers.

dpi (dots per inch)

This indicates the number of dots printed per inch (25.4 mm) as a unit for 
expressing resolution.

EcoPrint

This is a printing mode that reduces toner consumption. Pages printed in 
the EcoPrint mode are lighter than pages printed in the normal mode.

Emulation

This refers to emulation of other manufacturers’ printers. The printer 
emulates operation of the following printers: PCL6 and KPDL.

Form Feed Timeout

While data is being sent to a printer, some pauses may occur. At this time, 
the printer waits for the next data without making a page break. Form feed 
timeout is a function to wait only a preset amount of time before it 
executes an automatic page break. After the waiting period begins, once 
the designated amount of time is exceeded, the printer will automatically 
process the currently received data and print it out. If the machine has 

Содержание CLP 4550













































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для CLP 4550

Datamax RL4 Quick Start Manual preview
RL4
Бренд: Datamax Страницы: 2
Samsung SCX-3405FW Manual Del Usuario preview
SCX-3405FW
Бренд: Samsung Страницы: 347
Samsung SCX 6555N - MultiXpress Mono Multifunction Manual Del Usuario preview
SCX 6555N - MultiXpress Mono Multifunction
Бренд: Samsung Страницы: 180
Samsung SCX-4300 - SCX 4300 B/W Laser License Agreement preview
SCX-4300 - SCX 4300 B/W Laser
Бренд: Samsung Страницы: 18
Samsung SCX-4521FG - B/W Laser - All-in-One User Manual preview
SCX-4521FG - B/W Laser - All-in-One
Бренд: Samsung Страницы: 215
Samsung SCX 6320F - B/W Laser - All-in-One User Manual preview
SCX 6320F - B/W Laser - All-in-One
Бренд: Samsung Страницы: 332
Samsung SCX 4828FN - Laser Multi-Function Printer User Manual preview
SCX 4828FN - Laser Multi-Function Printer
Бренд: Samsung Страницы: 248
Samsung SCX 4725FN - B/W Laser - All-in-One User Manual preview
SCX 4725FN - B/W Laser - All-in-One
Бренд: Samsung Страницы: 253
Samsung ML 2851ND - B/W Laser Printer User Manual preview
ML 2851ND - B/W Laser Printer
Бренд: Samsung Страницы: 179
Samsung ML 2510 - B/W Laser Printer Manual Del Usuario preview
ML 2510 - B/W Laser Printer
Бренд: Samsung Страницы: 84
Samsung ML 1740 - B/W Laser Printer Manual Del Usuario preview
ML 1740 - B/W Laser Printer
Бренд: Samsung Страницы: 152
Samsung ML 1630 - B/W Laser Printer User Manual preview
ML 1630 - B/W Laser Printer
Бренд: Samsung Страницы: 142
Samsung ML 1630 - B/W Laser Printer Manual Del Usuario preview
ML 1630 - B/W Laser Printer
Бренд: Samsung Страницы: 82
Samsung SL-M2875FD Installation Manual preview
SL-M2875FD
Бренд: Samsung Страницы: 2
Samsung M337 User Manual preview
M337
Бренд: Samsung Страницы: 384
Samsung Lazett Combo SCX-4216F Service Manual preview
Lazett Combo SCX-4216F
Бренд: Samsung Страницы: 135
Samsung CLX-6260FD Manual Del Usuario preview
CLX-6260FD
Бренд: Samsung Страницы: 414
Samsung SCX 6555N - MultiXpress Mono Multifunction Administrator'S Manual preview
SCX 6555N - MultiXpress Mono Multifunction
Бренд: Samsung Страницы: 112

Бренды по названию

Популярные бренды

Загрузить еще бренды